Neck T-Nuts Installed

Counter sink using 3/4 in forstner bit. Main hole is 5/16 in. T nuts tapped (hammered) in with a little epoxy for added security. I used the wood river forstner depth stop guide which worked beautifully.

20111207-131728.jpg

20111207-131814.jpg

20111207-131911.jpg

20111207-131933.jpg

20111207-132008.jpg

20111207-132025.jpg

20111207-132034.jpg

2 thoughts on “Neck T-Nuts Installed”

  1. Hey looking good! What size nuts and bolts do you have there? Been looking for ages to find the best ones for my build!

    Cheers,

    Elliott

    Reply

    1. hey dude thanks for reading!

      for the tnuts i used the 1/4 -20 im really not sure what the 20 means, maybe its a thread count? anyhow i use those with the corresponding black bolts. i got them all from rockler. also if you dont have a drill press, i suggest getting the Woodriver forstner depth stop kit. its so so so worth it.

      thanks for reading and pass my site along to whoever else is thinkin about a build or something. i’ll always reply for help.

      Reply

Leave a reply to purelojik Cancel reply